The plug can now be removed from the door. To remove the cylinder, unscrew the retaining screws on the housing and pull it away from the plug. Now that the knob is off, you can see two parts of the cylinder – the housing and the plug. Once it is loose, take the key out and remove the knob by pulling it towards you. This will loosen the cam on the doorknob. With the key inserted into the cylinder, turn it to the left. Step 5: Separate the Two Parts of The Cylinder and Put Them Aside Finally, replace it with a new cylinder and reassemble the lock. Then, unscrew the screws that hold the cylinder and remove it. To do this, unscrew the screws that hold the plate in place and remove it. If the cylinder is damaged, you’ll need to replace it. Be careful not to damage the cylinder or the hole. If stuck, use a hammer and chisel to pry it out. Once it’s loose, pull it out of the hole. Insert a key into the hole and turn it counterclockwise to remove it. The keyhole on the deadbolt is where the cylinder is inserted. Step 4: Remove the Cylinder from The Plate Be careful not to lose any of the screws or pins that hold the cylinder in place. The cylinder will now be accessible and can be removed by pulling it straight out. Once the screw is removed, pull the knob off of the door. Use a Phillips head screwdriver to remove it. Step 3: Remove the Cylinder from The KnobĪ small screw located on the underside of the knob holds the cylinder in place. This clip helps to keep the cylinder in place and needs to be reattached when you replace the new one. Be careful not to lose the small retaining clip attached to the back of the cylinder. Once the cylinder is released, you can pull it out of the housing. Use a screwdriver or other object to push this pin back and release the cylinder. A small pin in the center of the cylinder holds it in place. You will need to push it back from the knob to remove the cylinder. Step 2: Push Back the Cylinder from The Knob Next, grab the knob and pull it straight off the spindle. Then, use a flathead screwdriver to pry off the decorative plate. To remove the exterior knob, start unscrewing the two screws that hold it in place. How to Remove a Schlage Deadbolt Lock Cylinder Step by Step Guide Step 1: Remove the Exterior Knob from The Door Read on for the step-by-step instructions. Once you have everything you need, you’re ready to get started. What You’ll Need Before You Get Started, You’ll Need to Gather a Few Supplies. Regardless of the reason, removing a Schlage deadbolt lock cylinder is a straightforward process that anyone can do with the right tools and instructions. In some cases, you may also need to remove the cylinder to change the lockset’s combination. If the lock is damaged and needs to be replaced, or if you want to upgrade to a new model, you’ll need to remove the old cylinder first. There are a few reasons you might need to remove a Schlage deadbolt lock cylinder. Why Remove a Schlage Deadbolt Lock Cylinder? But what do you do if you need to remove a Schlage deadbolt lock cylinder? This is a job that’s best left to the professionals, but in case of an emergency or if you want to know how to remove a schlage deadbolt lock cylinder, we’ve put together this guide for you. If you’re lucky, they’ll be easy fixes that you can complete yourself. As a homeowner, you’re likely to face various home repairs and security concerns over the years.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |